Siemens gigaset SX761 DSL Manual Download

Page: 25 / 118

The user interface

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / configure_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

The configuration program comprises the following functions:

Selecting a language

The user interface can be presented in various languages.

Click

Language

at the top right of the start screen.

If you wish to change the preset language, select the new language you require from

the list.

Click

to apply the setting.

Once the procedure has been concluded, the start screen will be displayed again.

Basic Setup Wizard

Use this wizard to make the settings required for connecting to

the Internet. You can set up data for your region and configure

Internet telephony. This is described from page 27.

Security Setup Wizard

This wizard allows you to take security precautions against

unauthorised access to the Gigaset SX761 dsl and the local

network. You can assign a password. This is described from

page 34. To protect your network, we strongly recommend

that you carry out this setup.

Advanced Settings

Additional functions are offered in the

Advanced Settings

menu. You can configure your PABX for Internet telephony,

back up and restore the configuration data, set up the Gigaset

SX761 dsl as a virtual server for the network, and perform

other functions as required. These configuration steps are

optional and can be carried out at a later stage. This is

described from page 37.

Status

You can view information about the configuration and status

of the Gigaset SX761 dsl in the

Status

menu. This is described

from page 89.

Language

You also have the opportunity to specify the language for the

user interface (page 25).

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands