background image

84

Administration

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / admin_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

7

Updating firmware

If Gigaset Communications GmbH or your Internet service provider releases a new ver-

sion of the firmware, you can update the firmware of the Gigaset SX761 dsl. You can 

perform the update manually or you can configure an automatic periodical check for 

firmware update.

ì

In the 

Advanced Settings

 menu, select: 

Administration 

– 

Firmware Update 

The firmware version that is currently installed on the device is displayed in the 

Current 

firmware version

 line. 

Configuring an automatic update

ì

Choose 

Update server

 as 

Firmware update source

.

The field 

Firmware update server

 shows the server address where your device 

checks whether a new firmware version is available. This is the default address and 

normally should not be changed.
If required, change the preset update server using the 

Change

 button. Enter the URL 

of the desired update server and click 

Apply

.

ì

Check periodically

: If 

Update server

 is selected, your device can periodically check 

on the update server whether a new firmware version is available. If this is the case, 

you will be informed when you are surfing the Internet. 

ì

Choose from the option menu if the device should search for updates:

Every day

Every week

 or 

Every month

.

Summary of Contents for gigaset SX761 DSL























































































































Reviews: