Siemens gigaset SX761 DSL Manual Download

Page: 65 / 118

Configuring Advanced Settings

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / configure_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

If you have selected the

Other

option, enter the data for

Displayed name

Author-

ization user name

SIP domain

SIP realm

Proxy server address

and

Registrar

server address

Leave the default settings for the parameters

SIP listen port

Proxy server port

Registrar server port

Voice codecs

and

Out-of-band DTMF

unless your service

provider has provided you with other data.

Click the

button to apply the settings.

Extensions

Your Gigaset SX761 dsl allows you to configure up to six internal extensions that you

can use for making calls via VoIP. Two of these extensions are connected to your Gigaset

SX761 dsl via the Phone 1 and Phone 2 ports, while the remaining extensions are con-

nections for SIP clients. You can assign each extension the relevant VoIP account for

incoming and outgoing calls and make other settings for each extension (e.g. call wait-

ing, call forwarding, caller display).
The process for configuring extensions, which use the two telephone ports of the

Gigaset SX761 dsl, is somewhat different to that for the SIP extensions. The latter must

be VoIP telephones, which are connected to the Gigaset SX761 dsl, or PCs with a SIP cli-

ent, which are connected to the Gigaset SX761 dsl.

In the

Advanced Settings

menu, select:

Telephony

–

Extensions

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands