Siemens gigaset SX761 DSL Manual Download

Page: 55 / 118

Configuring Advanced Settings

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / configure_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

In the

Advanced Settings

menu, select:

Internet

–

Address Translation (NAT)

–

Exposed Host

Enter the

Local IP address

of the PC that is to be enabled as an Exposed Host.

Enter a name for the PC in the

Comment

field.

Activate

Enabled

by ticking the check box.

Click the

Add

button to add the entry to the list.

You can add more than one PC to the list, but you can only activate one of them.

Click the

Delete

button to delete the entry from the list.

Apply the settings by clicking

Dynamic DNS

Any service you provide on the Internet can be accessed via a

Domain name.

Your

router's

Public IP address

is assigned to this domain name. If your Internet service pro-

vider assigns the IP address for your local network's WAN connection dynamically, the IP

address of the router can change. The assignment to the domain name will no longer

be valid and your service will no longer be available.
In this case you must ensure that the assignment of the IP address to the domain name

is updated regularly. This task is performed by the dynamic DNS service (

DynDNS

). You

can use the DynDNS service to assign the Gigaset SX761 dsl an individual fixed domain

name on the Internet even if it does not have a static IP address.
Various Internet service providers offer a free DynDNS service.

If you use the service of a DynDNS provider, your service can be reached on the Internet

as a subdomain of one of the DynDNS service domains.

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands