Siemens gigaset SX761 DSL Manual Download

Page: 33 / 118

Basic Setup Wizard

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / configure_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Select

Other

from the

Service provider

selection menu (default setting) or, if

required, use one of the suggested providers from the list. Enter the data you have

received from your service provider:

User name

Displayed name

Authorization user name

Password

SIP domain

SIP realm

Proxy server address

and

Registrar server address

Leave the default settings for the parameters

SIP listen port

Proxy server port

Registrar server port

Voice codecs

and

Out-of-band DTMF

, unless your service

provider has provided you with other data.

If you wish to delete the entered data, click the

Clear

button.

Confirm your selection with

Next >

This function corresponds to pressing the

Scan

button on the device’s back panel.

Summary

The basic settings you have made through the wizard are shown in the next step for you

to check.

If you want to change the settings, click

< Back>

If you want to confirm the settings, click

Finish

to close the Basic Setup Wizard.

The Gigaset SX761 dsl is now configured and ready to connect to the Internet. The

Security Setup Wizard

then opens automatically. We strongly recommend using the

Security Setup Wizard to protect your Gigaset SX761 dsl against attacks. If you want to

carry this out at a later stage, deactivate

I would like to run the Security Setup Wizard

now.

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands