Siemens gigaset SX761 DSL Manual Download

Page: 53 / 118

Configuring Advanced Settings

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / configure_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Click the

Delete

button to delete an entry. Click the

Add

button to add a new entry.

Apply the settings by clicking

Port Forwarding

If you configure Port Forwarding, the Gigaset SX761 dsl outwardly assumes the role of

the server. It receives requests from remote users under its public IP address and auto-

matically redirects them to local PCs. The private IP addresses of the servers on the local

network remain protected.
Internet services are addressed via defined port numbers. The Gigaset SX761 dsl needs

a mapping table of the port numbers to redirect the service requests to the servers that

actually provide the service.

Port Forwarding has been configured for this purpose.

In the

Advanced Settings

menu, select:

Internet

–

Address Translation (NAT)

–

Port Forwarding

Select the required application from the

Predefined applications

list.

Activate

Enabled

by ticking the check box.

Click the

Add

button. The data for the required service is entered on the screen.

Click the

Delete

button to delete an entry.

If the application you require is not in the list, you must manually enter the relevant data

on the screen:

Select the protocol for the service you are providing from the

Protocol

list.

Under

Public port

, enter the port number(s) of the service you are providing.

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands