Siemens gigaset SX761 DSL Manual Download

Page: 21 / 118

First steps

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / device_761.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Connecting wired to the PC

You can connect wired PCs to your Gigaset SX761 dsl to create a local area network

(LAN).
First connect just

one

PC to the Gigaset SX761 dsl. You can then carry out the general

configuration. (If you wish to connect more PCs, please turn to page 22.)

Connect one of the LAN ports (

LAN1

–

LAN4

yellow

) on the Gigaset SX761 dsl to

the Ethernet network card in your PC. To do this, use the LAN cable supplied (CAT5,

yellow

Connecting to the mains power supply

Connect the mains adapter cable to the

PWR

socket on the Gigaset SX761 dsl.

Plug the mains adapter into a mains socket.

If your device has an on/off button, switch on the device.

The Gigaset SX761 dsl is now switched on and ready for operation.

Please remember:

Only use the mains adapter supplied with the device (12V 1.5A DC).

LAN cable (yellow)

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands