Siemens gigaset SX761 DSL Manual Download

Page: 85 / 118

Administration

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / admin_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

If you choose

Never

, you can start the firmware update with by clicking

check for

updates.

Click

to apply the settings.

Automatic firmware update

If you have configured the option

Check periodically

and a new firmware version of

your Gigaset SX761 dsl is detected while you are surfing the Internet an information

page is opened. On this page you can choose whether the update should be started.

Click

Perform update now!

to start the update.

Enter the system password (see page 78) on the next page.

Click

. The firmware will now be updated.

User requested check

Click

check for updates

in order to check whether new updates are available on the

selected update server.
If a new firmware is available, an information page is opened. On this page you can

choose whether the update should be started.

Click on

Perform update now!

to start the update.

Click

. The firmware will now be updated.

Warning:
Do not

turn off the Gigaset SX761 dsl during the updating procedure and do not inter-

rupt the power supply. Turning off the device can make it unusable. The update can

take several minutes.

Gigaset Communications GmbH accepts no liability for damage that occurs through

improper use.

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands