Siemens gigaset SX761 DSL Manual Download

Page: 82 / 118

Administration

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / admin_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Backing up and restoring a configuration

When the Gigaset SX761 dsl has been configured, it is recommended that you back up

the settings. This means you can restore the settings at any time if they are accidentally

deleted or overwritten.
You can also reset the configuration to the factory settings. You should always do this

before handing the device to an external person.

In the

Advanced Settings

menu, select:

Administration

–

Save & Restore

Backing up configuration data

For

Task

, activate the

Save configuration

option.

Click

You can then set the location in which the backup file is to be saved in a file selection

window.

Select a local directory on your PC where you want to save the configuration file and

enter a file name.

Click

Save

The current configuration data is now saved in the specified file.

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands