Siemens gigaset SX761 DSL Manual Download

Page: 97 / 118

Appendix

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / appendix.fm / 06.10.2008

Schabl

one 2

005_0

7_2

You cannot conduct VoIP tel-

ephone calls.

The phone or the Gigaset SX761 dsl is not con-

nected properly to the DSL port. Check the cabling

and the ports.

The access data for your VoIP phones is not entered

correctly. Check the access data.

You have not assigned the VoIP phone numbers to

the telephone port. Check the configuration of the

telephone ports and the extensions.

Your VoIP configuration is not set up with the cor-

rect Codecs. Contact your VoIP provider and assign

the correct Codecs (see page 64).

Password forgotten or lost.

Reset the Gigaset SX761 dsl (page 16).

Warning

: Please bear in mind that this will return

all

the configuration settings to the factory settings.

You cannot access a

resource (drive or printer)

on a different PC.

Make sure that TCP/IP has been installed and con-

figured on all the PCs in the local network and that

the PCs all belong to the same workgroup.

Check whether the resource has been released on

the PC in question and whether you have the nec-

essary access rights.

Printing: Check whether the printer has been set up

as a network printer.

Operating information:

LAN ports
The LAN ports may only be used for in-house networks. The ports are destroyed

externally if there is a power surge.

Telephone ports
The phone ports are only suitable for connecting in-house phones/phone systems.

The ports are destroyed externally if there is a power surge.

Symptom

Possible cause and solutions

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands