Siemens gigaset SX761 DSL Manual Download

Page: 45 / 118

Configuring Advanced Settings

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / configure_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

MAC Address

If you already had Internet access through the same Internet service provider before

connecting the Gigaset SX761 dsl, it is possible that the MAC address of one of your PCs

was used for registration when the connection was being set up. In this case, you must

either replace the current MAC address with the MAC address registered with the Inter-

net service provider or ask your Internet service provider to register a MAC address for

you.
Carry out the following steps:

Connect a PC to the Gigaset SX761 dsl and open the configuration environment.

In the

Advanced Settings

menu, select:

Internet

–

Internet Connection

–

MAC Address

All settings apply for the displayed connection service that you selected for editing on

the

Advanced Settings

–

Internet

(page 39) screen. If you only set up one connection

service, this information is not displayed.

Specify which MAC address is to be used for the Internet connection:
–

Use default device MAC address

: You can leave this default setting if the MAC

address of the Gigaset SX761 dsl is used for connecting to the Internet.

–

Use MAC address of this PC

: Select this option if the MAC address of the cur-

rently connected PC has previously been registered for connecting to the Internet

or if you have re-registered the MAC address of the PC on which you are currently

working.

–

Use custom MAC address

: Select this option if you have asked your Internet

service provider to register a new MAC address and this is not the MAC address of

the PC on which you are currently carrying out the configuration.

Click

to apply the settings.

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands