Siemens gigaset SX761 DSL Manual Download

Page: 15 / 118

First steps

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / device_761.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Positioning

The Gigaset SX761 dsl can be set up in any suitable location in the home or office. You

do not need any special wiring. However, you should comply with the following guide-

lines:

Operate the Gigaset SX761 dsl only indoors within a temperature range of 0 to

+40 °C. Do not position the Gigaset SX761 dsl near sources of heat. Do not cover the

ventilation slots. High temperatures can damage the device.

A mains socket for 220/230 V~ and a connection socket for the splitter or LAN must

be available in the place where you set up the Gigaset SX761 dsl.

Position the Gigaset SX761 dsl so that it cannot fall down and damage the antennae.

Position the Gigaset SX761 dsl on a non-slip surface.

Do not place the Gigaset SX761 dsl on any furniture surface that could be affected

by the heat from the device.

Lay the cables so that nobody can trip over them. You should not cover the cables

with anything.

Please remember:

Network connections (LAN) via cables and telephone lines may only be set up with

the Gigaset SX761 dsl within enclosed rooms.

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands