![background image](http://html1.mh-extra.com/html/sick/transic111lp/transic111lp_operating-instructions-manual_1264716058.webp)
58
8014084/ZWT7/V3-1/2020-06 | SICK
O P E R A T I N G I N S T R U C T I O N S | TRANSIC111LP
Subject to change without notice
4
OPERATION
4.15.3
Display status of submenu item (command STATUS)
Displays the settings and status of all submenu items.
Syntax:
STATUS
<cr>
Example:
4.15.4
Display product name and software version (command VERS)
Displays the device name and software version.
Syntax:
VERS
<cr>
Example:
4.16
Using memory
4.16.1
Save parameters (command SAVE)
Saves the parameters from RAM to EEPROM.
Syntax:
SAVE
<cr>
Example:
>status
Submenu items are mode and status:
*** LASER TEMPERATURE CONTROLLER (LTC) ***
Mode : ON
State : TEMP_OK
*** OXYGEN MEASUREMENT (MEA) ***
Mode : MODE2
State : PEAK_LOCKED
Run Time Func.: OFF
*** ANALOG OUTPUT (OUT) ***
Mode : NORMAL
State : NORMAL
*** ERROR CONTROL (ERR) ***
Mode : ON
State : NO ERRORS
*** CUSTOMER INTERFACE (SCI2) ***:
Mode : STOP
*** SERVICE INTERFACE (SCI1) ***:
Mode : STOP
*** DISPLAY BOARD (DB) ***
Mode : NORMAL
State : NORMAL
>
>vers
TRANSIC100LP 9165087 0000 / 1.36>status
NOTICE:
Remember to save parameter changes with the command
SAVE
so that the changes
are not lost.
>save
EEPROM (basic) saved successfully
EEPROM (op) saved successfully
EEPROM (op_log1) saved successfully
EEPROM (op_log2) saved successfully