![background image](http://html1.mh-extra.com/html/sick/transic111lp/transic111lp_operating-instructions-manual_1264716055.webp)
55
8014084/ZWT7/V3-1/2020-06 | SICK
O P E R A T I N G I N S T R U C T I O N S | TRANSIC111LP
Subject to change without notice
OPERATION
4
4.14.4
Display calibration information (command CINFO)
Displays information from the last adjustment.
Syntax:
CINFO
<cr>
Example:
4.14.5
Display status of display range (command DB)
Displays the status of the display range.
Syntax:
DB
<cr>
Example:
4.14.6
List commands (command HELP)
Using this command without a parameter lists the commands accessible with the entered
password. Using the command with a command name as parameter displays a detailed
description of the respective command.
Syntax:
HELP
[Command]<cr>
Example:
Factory calibration:
Calibrated : 2009-11-24
Calib. text : Normal
Cal. point 1:
Given oxygen : 0.00
Gas temperature (C) : 20.81
Ref path temperature (C) : 21.90
Cal. point 2:
Given oxygen : 21.00
Gas temperature (C) : 20.81
Ref path temperature (C): 21.90
...
*** DISPLAY BOARD (DB) ***
Mode : NORMAL
State : NORMAL
Fault HW state : OFF
Display state : O2
Red led : OFF
Green led : SLOW
Relay : CLOSE
RELAY_MODE : FAULT_ALARM
LO POINT (%02) : 10.0
HI POINT (%02) : 11.0
...
Com-
mand
= Name of the desired command
>help
? Prints information about the device
?? Prints information even in POLL mode
.
.
>