![background image](http://html1.mh-extra.com/html/sick/transic111lp/transic111lp_operating-instructions-manual_1264716046.webp)
46
8014084/ZWT7/V3-1/2020-06 | SICK
O P E R A T I N G I N S T R U C T I O N S | TRANSIC111LP
Subject to change without notice
4
OPERATION
▸
Select one or more of the following variables by entering the abbreviation after the
command
FORM
:
Following formatting commands are available:
Examples:
Configuration of an output format comprising the oxygen measuring result (displayed with
3 decimal places) and the gas temperature in degrees Centigrade (also displayed with
3 decimal places). Text strings are inserted after the measured values for the output units.
Tab stop \t separates the various formatting commands and character \r for Enter starts a
new line after each measured result output. Command
SAVE
(
) saves the setting.
Command
FORM
without parameters outputs the current formatting string:
>form
Example:
Abbreviation
Data
O2
Filtered O
2
results
TGASC
Gas temperature (Centigrade)
TGASF
Gas temperature (Fahrenheit)
TIME
Time elapsed since last reset
DATE
Date (set by user, comes after the time elapsed since last reset)
ERR
Error category (0 = no error, 1 = non-fatal, 2 = fatal)
ADDR
Measuring device address (0 ... 99)
Table 7: Abbreviations and variables in the formatting string
Formatting command
Description
x.y
Change value for length (whole numbers and decimal places). The
changed length parameters are used for all following variables.
\t
Tab stop
\r
Enter key
\n
Line feed
\xxx
Any character code (decimal value with three digits)
""
String constant
U5
Field and length of the unit; units are output in standard width when
U is entered without length specification.
Table 8: Commands in formatting string
# can be used for \.
>form 2.3 O2 \t “%O2" \t 2.3 TGASC \t “C" \r \n
>save
EEPROM (basic) saved successfully
EEPROM (op) saved successfully
EEPROM (op_log1) saved successfully
EEPROM (op_log2) saved successfully
>send
2.504 %O2 28.065 C
2.3 O2 \t “%O2" \t 2.3 TGASC \t “C" \r \n
The standard output format is used with command FORM /:
>form /
F0
>send
Oxygen = 21.0