59
8014084/ZWT7/V3-1/2020-06 | SICK
O P E R A T I N G I N S T R U C T I O N S | TRANSIC111LP
Subject to change without notice
OPERATION
4
4.17
Resetting the measuring device
4.17.1
Reset (command RESET)
Resets the transmitter. This has the same effect as switching the transmitter off and on
again.
Syntax:
RESET
<cr>
Example:
4.17.2
Restore factory calibration (command FCRESTORE)
Open the Terminal program with the valid serial communication settings and enter the
command with password:
Syntax:
FCRESTORE
<cr>
Example:
4.18
Errors
4.18.1
Display error control status (command ERR)
Displays the error control status and active errors.
Syntax:
ERR
<cr>
Example:
4.18.2
Display Error protocol (command ERRL)
Displays the events in the Error protocol.
Syntax:
ERRL
<cr>
Example:
>reset
Resetting...
TRANSIC100LP 9165087 0000 / 1.36
SICK, 2011
...
>fcrestore
Customer calibration removed - remember SAVE command
Save the changes by issuing the command:
>save
>err
*** ERROR CONTROL (ERR) ***
Mode : ON
State : WARNING
ERRORS:
WARNING : WATCHDOG RESET OCCURRED
>
>err
*** ERROR CONTROL (ERR) ***
Mode : ON
State : WARNING
ERRORS:
WARNING : WATCHDOG RESET OCCURRED
>