43
8014084/ZWT7/V3-1/2020-06 | SICK
O P E R A T I N G I N S T R U C T I O N S | TRANSIC111LP
Subject to change without notice
OPERATION
4
4.7.5
Display/set serial communication mode (command SMODE)
Defines the mode of the serial interface via which the command is entered (maintenance
or RS-485 interface). Possible modes are STOP, POLL and RUN. Command
SAVE
(
parameters (command SAVE)”, page 58
) saves the setting.
Syntax: SMODE [Mode]<cr>
Example:
4.7.6
Display/set serial communication mode for RS-485 (command SMODE2)
Defines the communication mode for the RS-485 interface. Possible modes are STOP,
POLL and RUN. Command
SAVE
see “Save parameters (command SAVE)”, page 58
) saves
the setting.
Syntax: SMODE2 [Mode]<cr>
Example:
Mode
= Serial communication mode, possible modes are STOP, POLL and RUN
>smode
SMODE : STOP ?
>
Mode
= Serial communication mode, possible modes are STOP, POLL and RUN
>smode2
SMODE : STOP ?
>