SICK EuroFID, Operating Instructions Manual

Page: 71 / 214

Terminal Modules (Accessory)
EuroFID · Operating Instructions · 8011094 V2.3 · © SICK AG 71
Terminal module 1 – terminal strip X20
Functional group Function + – Jumper
1
1 Explanation → P. 69, §7.1.3
X10.
Switching outputs 2
2 24 VDC/100 mA max; protective diodes must be provided with inductive loads
S01 Measured value valid 2 1
S02 Calibration active 4 3
S03 Malfunction 6 5 J20 18–20
J21 17–19
S04 Service requirement 8 7
S05 Pre-alarm L1 10 9
S06 Alarm L2 12 11
S08 Alarm H2 14 13 J22 16–14
J23 13–15
S07 Pre-alarm H1 16 15
Control inputs 3
3 Max. 24 VDC
SI1 Malfunction, gas supply 18 17
SI2 Calibration block 20 19
SI3 Maintenance block 22 21 J10 + J11
Analog inputs 4
4 Standard: 0 … 10 V; 0 … 20 mA or 4 … 20 mA configurable
AI1 Analog input 1 26 25 J12 + J13
AI2 Analog input 2 28 27 J14 + J15
AI3 Analog input 3 30 29 J16 + J17
AI4 Analog input 4 32 31 J18 + J19
Analog outputs 5
5 Optionally 0 … 20 mA or 4 … 20 mA ( → P. 123, §11.11.6)
AO1 Measured value 34 33 – 21–22
AO2 Reference value 36 35 – 23–24
Terminal module 1 – terminal strip X10
Functional group Function + – Jumper
1
1 Explanation → P. 69, §7.1.3
X10.
Analog inputs 2
2 Standard: 0 … 10 V; 0 … 20 mA or 4 … 20 → P. 69, §7.1.3mA configurable
Analog input 1 1 2
Analog input 2 3 4
Analog input 3 5 6
Analog input 4 7 8
Control inputs 3
3 Max. 24 VDC
Maintenance block 9 10
without function 11 12
Switching outputs
4
4 24 VDC/100 mA max; protective diodes must be provided with inductive loads
Malfunction 18 17
Feedback malfunction
20 19 J20 18–20
J21 17–19
Alarm 14 13
Feedback alarm 16 15 J22 16–14
J23 13–15
Analog outputs 5
5 Optionally 0 … 20 mA or 4 … 20 mA ( → P. 123, §11.11.6)
Measured value 21 22
Reference value 23 24
The “Measured value” and “Reference value” analog outputs are potential-free towards the
other electronic components, but not towards one another (joint minus pole).