21
In your navigation application, you need to enter the IP address of the MiniPlex-2Wi, which is 10.0.0.1.
The port number to use is 10110. Figure 21 shows the settings in iNavX
®
.
Figure 21
The WiFi interface and the USB port operate simultaneously and with the same priority. This allows an
on-board fixed computer to be connected simultaneously with a wireless device.
The WiFi interface cannot be used to update the firmware of the MiniPlex-2Wi or to configure the WiFi
interface using $PSMDWI commands (see the Technical Reference, Proprietary NMEA Commands). Only
the USB interface can be used for this.
