Sharp UP-5900 Page 91 Service Manual Download

Page: 91 / 132

UP-5900VS

ABOUT UTILITY SOFTWARE

8 – 1

CHAPTER 8. ABOUT UTILITY SOFTWARE

The UP-5900’s utility softwere are provided by SHARP.

1. TOUCH PANEL CALIBRATION UTILITY PROGRAM

2. DOUBLE TAP SETUP UTILITY PROGRAM

3. STAMP LOGO REGISTER UTILITY PROGRAM FOR POS PRINTER

[File name] :

CALWINR. EXE

[Out line] :

This utility is for aligning press position and display position.

This utility should be used to calibrate when following case is occurred.

When touch panel driver was set up.

When touch panel device was exchanged in case like service.

Calibration data are written in “EEPROM”.

This utility is composed from the following screens.

The calibration screen which does calibration operation.

The drawing test screen which confirms a pressing position and displaying position in touch panel after calibration is finished.

CAUTION :

A full keyboard is necessary to operate this utility.

Touch panel driver must be set up in order to run this utility.

[Function] :

The position calibration for the touch panel.

To adjust it, use the touch pen of K-PAD (Keyboard enhanced Personal Digital Assistant).

PARTS CODE

PARTS NAME

MODEL

CPENP1004PCN5

Touch pen

K-PDA ZR-xxxx series

[File name] :

DBLTAP.EXE

[Out line] :

Double tap setup utility DBLTAP.EXE (will call utility onward) is used to improve double tap control over touch panel.

This utility can visually customize double tap recognition speed and tolerance area.

Customized value will be saved independently to each user, and automatically reflected to touch panel operation.

[Function] :

Configures tolerance distance for first tap and second tap upon double tap operation. (Area :Wide - Narrow)

Configures tolerance for time difference between first tap and second tap upon double tap operation. (Speed:Slow - Fast)

[File name] :

PRTUTIL.EXE

[Out line] :

This utility registers stamp logo image to POS printer.

Supported printers are 2 types, UP-T80BP and ER-01PU.

[Function] :

Registration of 2 types of logo image and test print for UP-T80BP.

Registration of 1 type of logo image and test print for ER-01PU.

Summary of Contents for UP-5900





































































































































Search results

Summary of Contents for UP-5900

Reviews:

Related manuals for UP-5900

Brands by name

Popular brands

Sharp UP-5900, Service Manual

Search results

Summary of Contents for UP-5900

Reviews:

Related manuals for UP-5900

Brands by name

Popular brands