Sharp UP-5900 Page 12 Service Manual Download

Page: 12 / 132

UP-5900VS

SERVICE PRECAUTION

3 – 3

Procedure

■

Power unit - Main PWB unit connection cable core change

Content of change

The core of the cable connecting the power unit and the main PWB

unit is changed.

■

LCD cable treatment

Fig.1 LCD cable treatment and core addition

Fig.2 LCD cable treatment (Cable and riser fixing)

Fig.4 Earth Spring 1 (30PK)

Fig.5 Earth Spring 2

Earth Spring 1 and 2 are the same one.

Earth Spring 1 in Fig.4 is packed together with 30PK.

Procedure

Pass the binding band through the core as shown in

the photo.

Procedure

Bind the core as shown in the photo and pull the

band to fix.

Procedure

Fix so that the binding position of the band does not
extend out of the plate.

Binding position of the
binding band

Inside

The binding position of the band
must be inside of this position.

Core: RCORF2356BHZZ(SC18E)
Pass all the cables (1pin - 15pin)
through the core (SC18E) except for
the power cable. At that time, be
careful not to apply an external force
to the power unit capacitor.

This cable is passed under the
PS unit - Main PWB cable.

Binding band

BNF18

Use the binding band for
wiring as shown in the
figure.

30PK standard destination model

Summary of Contents for UP-5900





































































































































Search results

Summary of Contents for UP-5900

Reviews:

Related manuals for UP-5900

Brands by name

Popular brands

Sharp UP-5900, Service Manual

Search results

Summary of Contents for UP-5900

Reviews:

Related manuals for UP-5900

Brands by name

Popular brands