Sharp ROUVO V, User Manual

Page: 265 / 280

Important Notes about Bluetooth and Wi-Fi
Bluetooth
Your wireless carrier is not liable for any data/information leakage due to use
of handset Bluetooth function. Users are advised to ensure no other radio
stations sharing the same frequency band are in use nearby. In the event
that interference occur between handset and other radio stations, move to
another location or disable Bluetooth functions immediately.
Wi-Fi
Wi-Fi (Wireless LAN) uses radio waves to enable communication between
compatible devices within range. However, it is advisable for the user to
configure security settings to avoid risk of data interception. Your wireless
carrier is not liable for any data interception due to use of handset Wi-Fi
function.
This mobile device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1.
This device may not cause harmful interference
2. This device must accept any interference received, including
interference that may cause undesired operation.
Any change or modification that is not expressly approved by the
manufacturer responsible for the compliance of this device voids the user's
authority to operate this device.
This mobile phone has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Compliance
264 265