78
Data Communication
SH-06F_E_09.fm
[78/78]
■
Advanced settings
You can make settings for operations available when the tablet is
connected to a Bluetooth Smart device.
1
In the Bluetooth screen, [
B
] of a connected
Bluetooth Smart device
/
[Advanced settings]
2
Select an item
Incoming call notification
: Set whether to notify you through
the Bluetooth Smart device when receiving a call.
Mail reception notification
: Set whether to notify you through
the Bluetooth Smart device when receiving a mail.
Alarm notification
: Set whether to notify you through the
Bluetooth Smart device when an alarm rings.
Schedule notification
: Set whether to notify you of schedule
notifications from the calendar through the Bluetooth Smart
device.
Time change notification
: Set whether to synchronize clocks
between the Bluetooth Smart device and the tablet.
Link loss notification
: Set how to notify you when the
Bluetooth connection is temporarily disabled.
NFC stands for Near Field Communication and is a near field
wireless communication system which conforms to the
international standards set by ISO (International Organization
for Standardization). You can use the contactless IC card
function, reader/writer function (R/W), Peer to Peer function
(P2P), etc. on the tablet.
You can send and receive data to and from devices which
support Reader/Writer, P2P function.
Enable [Reader/Writer, P2P] and set Android Beam to [ON] in
advance (
n
P. 46 “NFC/Osaifu-Keitai settings”).
Android Beam is not available when NFC/Osaifu-Keitai lock is
set.
Android Beam may not be available depending on the app.
Communication with all devices which support Reader/Writer,
P2P function is not completely guaranteed.
The precautions about using Android Beam are the same as
those about iC communication (
n
P. 75 “When using iC
communication”).
Other precautions are the same as those for when you hold the
tablet over the other device (
n
P. 46 “Precautions about holding
over the other device”).
■
Sending data
Example: Phonebook
1
In the home screen, [
R
]
/
[docomo
phonebook]
/
[Contacts]
/
select a name
2
Place the
a
mark over that of the other party’s
device
:
[Touch to beam] appears.
:
If “License Agreement” is displayed, check the content,
follow the instructions on the screen and operate.
3
Touch the screen
■
Receiving data
1
Place the
a
mark over that of the other party’s
device
NFC communication
Android Beam
SH-06F_E.book 78 ページ ２０１４年６月２６日 木曜日 午後５時４１分
