Home
/
Sharp
/
MX-3050N
/
User Manual

Sharp MX-3050N, User Manual, Page: 93 / 906

Share

Page: 93 / 906

Sharp MX-3050N User Manual Download Page 93

1-90

BEFORE USING THE MACHINE

►

STOPPING/DELETING A JOB, PRIORITY PROCESSING AND CHECKING THE STATUS

Completed job

If the receiving machine is a SHARP machine, the receiving machine will return "dispatched" if the fax was received
normally, or "processed" if reception failed.

Display

Status

"OK"

Normal termination

"Send OK"

Transmission was completed.

"NG Ck Line"

Fax line cable is not connected

"In Memory"

Reception completed but the fax has not been printed.

The received data (each page) has not been printed or forwarded. (The received data has not
been deleted.)

"Received"

Printed received fax data.

The fax has been received.

The received data (each file) was stored.

"Forward OK"

The received data/received data (each file) has been forwarded.

"Stopped"

The job was stopped.

"Delete"

Deleted received data in the image check screen.

"Number of successful
transmission
destinations/Total
destinations OK"

Completion of a broadcast transmission, serial polling, or inbound routing operation.

If transmission to 3 destinations was successful out of a total of 5, "003/005 OK" will appear.

"No Response"

An error occurred because there was no response from the destination.

"Busy"

An error occurred because the other party was busy.

"Report Wait"

Transmission confirmation was enabled, but transmission confirmation was not received within
the set time.

"Received"

E-mail other than Internet fax received

"Rejected"

A fax was sent from a party that has been blocked by the anti junk fax function.

"NGxxxxxx"

Transmission/reception was not successful because a communication error occurred (a 6-digit
error code appears in xxxxxx.)

"Error"

An error occurred while the job was being executed.

"displayed"

Displayed at the receiving machine

"dispatched"

Forwarded elsewhere before being displayed at the receiving machine

"processed"

Processed without being displayed at receiving machine

"deleted"

Message deleted at receiving machine

"denied"

Receiving machine refused to notify sending machine of message processing content

"failed"

An abnormal condition occurred

«
...
91
92
93
94
95
...
»

Summary of Contents for MX-3050N











































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments