manualshive.com logo in svg

Sharp MX-3050N, User Manual, Page: 790 / 906

Share
Download
Sharp MX-3050N User Manual Download Page 790

7-95

SYSTEM SETTINGS

►

SYSTEM SETTINGS

Specified Pages per File

Generates a separate file for each scanned page when multiple pages are scanned.
If this setting is enabled, a number of pages per file can be specified. 

Page No.

Any number of pages can be specified as the number of pages per file. This setting can be used if [Specified Pages 
per File] is enabled. 

Easy Scan Settings

Set the default colour mode for Easy Scan.
Set [Colour] for when the Colour Start key is tapped, and [Black & White] for when the B/W Start key is tapped.

Resolution Setting

The following settings are available for the default resolutions of common scan, E-mail, Internet fax, and fax mode.

Scanner Common

100 X 100 dpi, 150 X 150 dpi, 200 X 200 dpi,
300 X 300 dpi, 400 X 400 dpi, 600 X 600 dpi

E-mail

100 X 100 dpi, 150 X 150 dpi, 200 X 200 dpi,
300 X 300 dpi, 400 X 400 dpi, 600 X 600 dpi

Condition Settings

Default Reply.Address Set

The information stored here is used if you do not specify [Reply to] in the send settings when performing Scan to E-mail. 

Compression Mode at Broadcasting

Selects the compression mode for broadcasting using Scan to E-mail or Internet fax. The compression mode set here is 
used for all destinations regardless of their individual compression mode settings. 

Black & White

MH (G3), MMR (G4) 

Colour/Greyscale

Low, Medium, High
Bk Letter Emphasis 

Maximum Size of E-mail Attachments(E-Mail)

To prevent the transmission of excessively large image files by Scan to E-mail, a file size limit can be set from 1 MB to 
10 MB in increments of 1 MB. If the total size of the image files created by scanning the original exceeds the limit, the 
image files are discarded.
If you do not wish to set a limit, select [Unlimited]. 

If the E-mail attachment(s) exceed maximum size, it will be sent in multiple files.

If an E-mail attachment exceeds the maximum size, it will be sent in multiple files.

When [JPEG] is selected for the file type, [Specified Pages per File] cannot be selected. 

Setup Items

Setting

Colour

Auto
Full Colour

Black & White

Greyscale
Mono2

This setting is linked to "

Maximum Size of E-mail Attachments (page 7-100)

" of the Internet fax settings. 

Summary of Contents for MX-3050N











































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments