manualshive.com logo in svg

Sharp MX-3050N, User Manual, Page: 6 / 906

Share
Download
Sharp MX-3050N User Manual Download Page 6

1-3

BEFORE USING THE MACHINE

►

BEFORE USING THE MACHINE

PART NAMES AND FUNCTION

EXTERIOR

(1)

Output tray (exit tray cabinet)

*1

Received faxes and printed papers are delivered to this 
tray.

(2)

Job separator tray (upper tray)

*1

Output is delivered to this tray.

(3)

Automatic document feeder

It automatically feeds and scans multiple originals. 2-sided 
originals can be automatically scanned. For the 
MX-3070N/MX-3570N/MX-4070N, both sides of 2-sided 
originals can be automatically scanned at one time.

►

AUTOMATIC DOCUMENT FEEDER (page 1-77)

(4)

USB port (A type)

This is used to connect a USB device such as a USB 
memory device to the machine.
Supports USB 2.0 (Hi-Speed).

(5)

Operation panel

This panel hosts the [Power] button, [Power Save] 
button/indicator, error indicator, [Home Screen] button, 
main power button, data notification indicator and touch 
panel.
Use the touch panel to operate each of these functions.

►

OPERATION PANEL (page 1-8)

(6)

Exit tray unit (right tray)

*1

Set this tray as the output tray if needed.

(7)

Keyboard

*1

Use this as a substitute for the soft keyboard displayed 
on the touch panel. When not being used, it can be 
stored under the operation panel. 

(8)

Inner finisher

*1

This staples paper. A punch module can also be installed 
to punch holes in output paper. You can also perform 
stapling manually.

►

INNER FINISHER (page 1-106)

*1

Peripheral device.
Equipped standard or not available in some countries and regions. Not available on some models. Contact your 
dealer or nearest authorised service representative.

BEFORE USING THE MACHINE

(2)

(7)

(5)

(3)

(3)

(4)

(6)

(8)

(1)

MX-3050N/MX-3060N/MX-3550N/
MX-3560N/MX-4050N/MX-4060N

Summary of Contents for MX-3050N











































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments