manualshive.com logo in svg

Sharp MX-3050N, User Manual, Page: 743 / 906

Share
Download
Sharp MX-3050N User Manual Download Page 743

7-48

SYSTEM SETTINGS

►

STATUS

Power Reset

The Power Reset screen enables you to restart the machine or enter the power save mode. 

Data List

Lists showing the settings and information registered in the machine can be printed.

List for User

List for Administrator

You can print out the lists and reports that only the administrator can refer to.
When using "Image Sending Activity Report (Internet Fax)" in Image Sending Activity Report (Auto), select "Settings" 

→

 

[System Settings] 

→

 [Image Send Settings] 

→

 [Internet Fax Settings] 

→

 [Receive Settings] 

→

 [2-Sided Printing of 

Received Data], enabling you to specify 1-sided or 2-sided printing.
When using "Image Sending Activity Report (Fax)" in Image Sending Activity Report (Auto), select "Settings" 

→

 [System 

Settings] 

→

 [Image Send Settings] 

→

 [Fax Settings] 

→

 [Receive Settings] 

→

 [2-Sided Printing of Received Data], 

enabling you to specify 1-sided or 2-sided printing.

This function requires administrator rights.

Item

Description

Reboot the MFP

Reboots the machine.
Tapping the [Execute] key opens the Restart screen, and then tapping the [Execute] key 
again restarts the machine.

Enter the Power Save Mode

Shifts the machine to power save mode.
Tap the [Execute] key to open the power save mode screen.

The two-sided or one-sided list printing setting is determined by Device Control - Data List - 1-Sided/2-Sided.

List name

Description

Machine Status List

This list shows information needed by regular users, such as hardware statuses, software 
statuses, printer environment settings, and paper tray settings.

Printer Test Page

This is used to print the PCL Symbol Set List, various font lists, and the NIC page (network 
interface settings, etc.).

• PCL  Symbol  Set  List
• PCL Internal Font List
• PCL Extended Font List
• PS Font List
• NIC Page

Sending Address List

Lists can be printed of various addresses stored in the machine. 

• Individual List
• Group List
• Program List
• Memory Box List
• All Sending Address List

Document Filing Folder List

This shows the folder names for document filing.

Summary of Contents for MX-3050N











































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments