4-5
FACSIMILE
►
BEFORE USING THE MACHINE AS A FAX
2
Make sure the main power switch is in the "
" position.
When the main power indicator is lit up, the main power is in the "
" position. If the main power indicator is not lit up,
turn the main power switch to the "
" position and press the [POWER] button on the operation panel.
*If the fax function will be used, and in particular if reception or timer transmission will take place at night, always keep
the main power switch in the "
" position.
If the fax function will be used, and in particular if reception or timer transmission will take place at night, do not turn the
main power off.
3
Setting the telephone line type.
The machine's dial mode setting must be set to match the type of telephone line you are using.
* If the setting is incorrect, it may result in dialling failures or cause calls to be made to the wrong destination.
• If you want to set the type of telephone line automatically
In "Settings (administrator)", select [System Settings]
→
[Image Send Settings]
→
[Fax Settings]
→
[Default Settings]
→
[Dial Mode Setting], and tap the [Auto Select] key.
• If necessary, you can set the type of telephone line manually.
• This setting can only be activated in Canada.
4
Checking the date and time.
Verify that the correct date and time are set in the machine.
To set the date and time of the machine:
In "Settings", select [System Settings]
→
[Common Settings]
→
[Clock Adjust].
If [Disabling of Clock Adjustment] has been enabled, the date and time cannot be modified.
In "Settings (administrator)", select [System Settings]
→
[Common Settings]
→
[Enable/Disable Settings]
→
[Operation Settings]
→
[Disabling of Clock Adjustment], and cancel the adjustment disabling setting.
Main power indicator
[Power] button
Main power switch