4-104
FACSIMILE
►
OTHERS FUNCTION
3
Tap the [Others] key, and tap the [Transaction Report] key.
4
Tap the key of the print settings.
After the settings are completed, tap
and [Back] keys in
sequence.
To cancel the transaction report setting:
Tap the [Do not Print] key.
• The print conditions for a transaction report are as follows:
•"Always Print": A transaction report is printed no matter whether the transmission succeeds or fails.
•"Print at Error": A transaction report is printed when transmission fails.
•"Do not Print": Do not print a transaction report.
• Set the [Print Original Image] checkbox to
to include part of the transmitted original in the transaction report.
• Even if the [Print Original Image] checkbox is
, the original cannot be printed when speaker dialling, manual
transmission, direct transmission, polling reception, or F-code transmission is used.
5
Tap the [Start] key to start scanning of the original.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
• A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
• When scanning finishes, place the next original and tap the [Start] key. Repeat until all pages have been scanned and
then tap the [Read-End] key.
A beep will sound to indicate that transmission has ended.
When you use the automatic document feeder to scan an original, you can tap the [Preview] key to check a preview of
the image before sending a fax. For more information, see "
CHECKING THE IMAGE TO BE TRANSMITTED (page
4-30)
". However, settings for this function cannot be changed in the preview screen.
Back
Do not Print
Always Print
Print at Error
Others
reception memory
Speaker
Start
Transaction
Report
Print Original Image
CA
Preview
100%