Home
/
Sharp
/
MX-3050N
/
User Manual

Sharp MX-3050N, User Manual, Page: 851 / 906

Share

Page: 851 / 906

Sharp MX-3050N User Manual Download Page 851

7-156

SYSTEM SETTINGS

►

SYSTEM SETTINGS

Automatic

This function controls the power optimally for each time period by analyzing the use of machine based on job logs
obtained during a certain time period.

Manual

You can set a pattern for each time band.
The machine already has the 3-pattern template. The Energy Save pattern can be added to the "Original Eco Patterns 1
to 4".

Three-pattern template

Sleep Mode Power Level

Low Power:

The machine switches to the power saving mode, but it takes some time to recover.

Fast Wake Up:

Compared with Low Power, the power value rises by a certain degree, but it results in faster recovery.

Motion Sensor:

This enables switching of power saving modes by the motion sensor.

Mode2 (Job Start
Priority2)

After 30 minutes

150 to 699

Mode3 (Energy Saving
Priority1)

After 5 minutes

40 to 149

Mode4 (Energy Saving
Priority2)

After the minimum time period

Up to 39

Sleep Mode Power
Level

Low Power :The machine switches to the power saving mode, but it
takes some time to recover.
Fast Wake Up :Compared with Low Power, the power value rises
by a certain degree, but it results in faster recovery.
Motion Sensor:This enables switching of power saving modes by
the motion sensor.

–

If the machine does not have the 4-week job log information, the machine enters the template2 (Mode3 (Energy Saving
Priority1) between 8:00 and 18:00 hours). Then after that, it enters Mode4 (Energy Saving Priority2).

Template

Pattern

Description of mode

Template 1

All Day "Energy Save
Priority2"

The machine runs in the "Mode4 (Energy Saving Priority2)" all the
time.

Template 2

8:00-18:00 "Energy Save
Priority1"

The machine runs in "Mode3 (Energy Saving Priority1)" between 8:00
and 18:00, and in "Mode4 (Energy Saving Priority2)" at other times.

Template 3

8:00-18:00 "Job Start
Priority1"

The machine runs in "Mode1 (Job Start Priority1)" between 8:00 and
18:00, and in "Mode4 (Energy Saving Priority2)" at other times.

Pattern

Transition time

Average outputs per

hour

«
...
849
850
851
852
853
...
»

Summary of Contents for MX-3050N











































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments