Sharp Actius PC-MC24 Operation Manual Download Page 64

Page: 64 / 146

3-6

External Display

You can use an external monitor with the computer. To display the images on both
displays simultaneously, use the 1024x768 resolution.

•

Some monitors, which are not compatible with the computer, may not
display correctly.

•

In this section, you often see the expression “

Display Properties

dialog

box.” To open the dialog box, right-click somewhere on the Windows
desktop and select

Properties

from the pop-up menu.

•

To display the image on an external monitor, you may need to install
its driver. Before using the external monitor, refer to the manual
included with it.

Connecting External Monitor

Turn off the computer and the external monitor.

Open the external display port cover.

Be sure to close the display port cover when the external display port is
not used.

Display Port Cover

Summary of Contents for Actius PC-MC24



















































































































































Search results

Summary of Contents for Actius PC-MC24

Reviews:

Related manuals for Actius PC-MC24

Brands by name

Popular brands

Sharp Actius PC-MC24, Operation Manual

Search results

Summary of Contents for Actius PC-MC24

Reviews:

Related manuals for Actius PC-MC24

Brands by name

Popular brands