2
Safety notes
Preliminary information
Compact Operating Instructions – MOVIMOT
®
MM..D with AS-Interface
7
2
Safety notes
The following basic safety notes must be read carefully to prevent injury to persons
and damage to property. The user must ensure that the basic safety notes are read
and observed. Make sure that persons responsible for the plant and its operation, as
well as persons who work independently on the unit, have read through the operating
instructions carefully and understood them. If you are unclear about any of the infor-
mation in this documentation, or if you require further information, please contact
SEW-EURODRIVE.
2.1
Preliminary information
The following safety notes are primarily concerned with the use of MOVIMOT
®
drives.
If you use other SEW components, also refer to the safety notes for these particular
components in the corresponding documentation.
Please also observe the supplementary safety notes in the individual chapters of this
documentation.
2.2
General information
Never install or start up damaged products. In the event of damage, submit a com-
plaint to the shipping company immediately.
During operation, MOVIMOT
®
drives can have movable or rotating parts or hot surfa-
ces.
Removing covers without authorization, improper use as well as incorrect installation
or operation may result in severe injuries to persons or damage to machinery. Docu-
mentation must be referred to for further information.
2.3
Target group
Only skilled persons
are authorized to install, startup or maintain the units or correct
unit errors (observing IEC 60364 and/or CENELEC HD 384 or DIN VDE 0100 and
IEC 60664 or DIN VDE 0110 as well as national accident prevention regulations).
In the context of these basic safety notes, qualified electricians are persons familiar
with the installation, assembly, startup, and operation of the product and who possess
the qualifications to perform the tasks required of them.
All persons involved in any other work, such as transportation, storage, operation and
waste disposal, must be trained appropriately.
21328994/EN – 11/2014
