2
Safety notes
Designated use
Compact Operating Instructions – MOVIMOT
®
MM..D with AS-Interface
8
2.4
Designated use
MOVIMOT
®
inverters are components intended for installation in electrical systems or
machines.
In case of installation in machines, startup of MOVIMOT
®
inverters (i.e. start of desig-
nated operation) is prohibited until it is determined that the machine meets the require-
ments stipulated in the Machinery Directive 2006/42/EC.
Startup (i.e. the start of designated use) is only permitted under observance of EMC
Directive 2004/108/EC.
MOVIMOT
®
inverters meet the requirements stipulated in the low voltage directive
2006/95/EC. The standards contained in the declaration of conformity are used for the
MOVIMOT
®
inverter.
Observe the technical data and information on the connection requirements as provi-
ded on the nameplate and in the documentation.
2.4.1
Safety functions
MOVIMOT
®
inverters must not be used to perform any safety functions unless these
are described and explicitly approved.
2.4.2
Hoist applications
MOVIMOT
®
inverters are suitable for lifting applications to a limited degree only, see
operating instructions, chapter "Additional function 9".
Do not use MOVIMOT
®
inverters as safety devices in lifting applications.
2.5
Transportation, storage
Observe the notes on transportation, storage and proper handling. Comply with the re-
quirements for climatic conditions stated in chapter "Technical data" of the operating
instructions. Tighten attached lifting eyes securely. They are designed to handle the
mass of the MOVIMOT
®
drive. Do not mount or apply any additional loads. Use suita-
ble, sufficiently rated handling equipment (e.g. rope guides) if required.
21328994/EN – 11/2014
