SEW-Eurodrive MOVIGEAR DAC B, Operating Instructions Manual

Page: 82 / 258

82
Operating Instructions – MOVIGEAR® DAC-B
6
Description of the DIP switches
Startup
6.3 Description of the DIP switches
6.3.1 Overview
The following figure shows the DIP switches S1 and S2:
The following table shows the functions of DIP switch S1:
The following table shows the functions of DIP switch S2:
2391265547
DIP switch S1
1 2 3 4
PWM cycle
frequency
Deactivate
DynaStop
without enable
Reserved Reserved
ON 8 kHz On Reserved Reserved
OFF 4 kHz Off Reserved Reserved
DIP switch S2
1 2 3 4
Startup mode Reserved Direction of
rotation
reversal
Speed
monitoring
1)
1) The DIP switch is only active in "Easy" mode
ON Expert Reserved On On
OFF Easy Reserved Off Off
34567 34567
ON
ADE04SA
1 2 3 4
ON
ADE04SA
1 2 3 4
t1
S1 S2
f2 f1
1 2 3 4 1 2 3 4
ON DIP
1 2 3 4
ON DIP
1 2 3 4
S2 S1
NOTICE
Set the DIP switches using suitable tools, e.g. a flat tip screwdriver with a blade width
≤ 3 mm.
The force used for setting the DIP switches must not exceed 5 N.
0 0
I