46
Operating Instructions – MOVIGEAR® DAC-B
4
MOVIGEAR
®
with optional package for wet areas
Mechanical Installation
4.11 MOVIGEAR
®
with optional package for wet areas
4.11.1 Installation notes
Observe the following additional notes when installing MOVIGEAR
®
drive units with
optional package for applications in wet areas:
• Make sure to prevent moisture an dirt from entering the unit during the installation.
• After electrical installation, make sure that the sealing and sealing surfaces are clean
during assembly.
• Check the state of the gasket during maintenance. If damaged: Consult SEW-
EURODRIVE.
• Make sure to install the cables with a drip loop.
• Only use the metal cable glands/screw plugs provided or offered by SEW-
EURODRIVE, see chapter "Technical data and dimension sheets".
• You must seal unused cable bushings and plug connectors with suitable screw plugs,
see chapter "Technical data and dimension sheets".
Example
The following figure is an example of cable routing with drip loop:
INFORMATION
SEW-EURODRIVE guarantees that the HP200 special surface is free from faults when
delivered. Report any transportation damage immediately.
Although the housing surfaces have a high impact resistance, they are to be handled
with care. The corrosion protection can be affected by damage to the surface as a
result from improper handling during transport, installation, operation, cleaning, etc.
SEW-EURODRIVE is not liable for such damage.
2350617739
Summary of Contents for MOVIGEAR DAC B
Page 2: ...SEW EURODRIVE Driving the world...
Page 257: ......
