124
Operating Instructions – MOVIGEAR® DAC-B
8
Description of command pcb parameters
Parameters
Command pcb parameters \ display values \ binary inputs
Binary input DI01
index 8334.0, bit 1
The parameter indicates the state of binary input DI01.
Binary input DI02
index 8334.0, bit 2
The parameter indicates the state of binary input DI02.
Binary input DI03
index 8334.0, bit 3
The parameter indicates the state of binary input DI03.
Binary input DI04
index 8334.0, bit 4
The parameter indicates the state of binary input DI04.
Command pcb parameters \ display values \ binary outputs
Binary output
DO01
For binary output DO01, see power section.
Command pcb parameters \ display values \ unit data
Unit name
index 9701.1 –
9701.5
The parameter indicates the type designation of the command pcb.
Device signature
index 9823.1 –
9823.5
The parameter is used to indicate and enter the device signature. This parameter is
used to assign a name to the command pcb so you can identify it in the hardware tree
or in other visualization elements.
ASInterface option
index 10095.39
The parameter indicates the type of AS-Interface option:
Firmware AS-Inter-
face option
index 9701.53,
9701.54
The parameter indicates the part number and version of the firmware used in the AS-
Interface option.
Firmware
command level
index 9701.30,
9701.31
The parameter indicates the part number of the firmware used in the command pcb.
Disabling
mechanical control
elements
index 10096.30
bit 13 – 15
The parameter indicates disabled/enabled mechanical control elements.
Parameter value
Type of AS-Interface option
0
AS-Interface is not available
3
GLK30A binary slave
4
GLK31A double slave
0
0
I
Summary of Contents for MOVIGEAR DAC B
Page 2: ...SEW EURODRIVE Driving the world...
Page 257: ......
