26
Operating Instructions – MOVIGEAR® DAC-B
4
Installing MOVIGEAR
®
Mechanical Installation
4.4.4
MOVIGEAR
®
gear unit venting
MOVIGEAR
®
with
installed breather
valve
SEW-EURODRIVE delivers all MOVIGEAR
®
drive units ordered for a specific mounting
position with a breather valve that is activated and installed according to the mounting
position.
MOVIGEAR
®
drive units with optional "package for wet areas" are generally delivered
with the activated breather valve installed corresponding to the respective mounting
position.
MOVIGEAR
®
with
separately
included breather
valve
MOVIGEAR
®
drive units ordered for a universal mounting position are delivered by
SEW-EURODRIVE with a separately included breather valve.
In this case, the breather valve is delivered in the hollow shaft of the drive unit. Before
startup, you must replace the highest oil screw plug with the provided breather valve.
Activating the
breather valve
After installing the breather valve, you must activate it as follows. For designs with the
breather valve screwed in: Check whether the breather valve is activated. If not, you
have to remove the transport fixture of the breather valve prior before you start up the
drive unit!
1. Breather valve with transport fixture
2. Remove transport fixture
3. Activated breather valve
2350149003
2350216203
2350269835
Summary of Contents for MOVIGEAR DAC B
Page 2: ...SEW EURODRIVE Driving the world...
Page 257: ......
