30
Operating Instructions – MOVIGEAR® DAC-B
4
Shaft-mounted gear unit with keyway
Mechanical Installation
4.5.2
Disassembly notes
The following description only applies when the drive is disassembled using the SEW-
EURODRIVE assembly/disassembly kit (see previous description, points 3B or 3C).
1. Loosen the retaining screw [1].
2. Remove parts [2] to [4] and, if applicable, the distance piece [5].
3. Insert the forcing disk [8] and the fixed nut [7] from the SEW-EURODRIVE installa-
tion/removal kit between the customer shaft [6] and the retaining ring [4].
4. Re-install the retaining ring [4].
5. Screw the retaining screw [1] back in. Now you can force the drive off the shaft by
tightening the bolt.
INFORMATION
For information on the SEW-EURODRIVE assembly/disassembly kit, see chapter
"Technical data and dimension sheets / Design notes".
2348647051
[1] Retaining screw
[2] Lock washer
[3] Washer
[4] Retaining ring
[5] Spacer tube
[6] Customer shaft
2348645131
[1] Retaining screw
[4] Retaining ring
[6] Customer shaft
[7] Fixed nut
[8] Forcing disk
[1]
[2]
[3]
[4]
[5]
[6]
[1]
[4]
[7]
[8]
[6]
Summary of Contents for MOVIGEAR DAC B
Page 2: ...SEW EURODRIVE Driving the world...
Page 257: ......
