manualshive.com logo in svg

SEW-Eurodrive MFD Series, Manual, Page: 99 / 140

Share
Download
SEW-Eurodrive MFD Series Manual Download Page 99

13

Operation with the MOVITOOLS

®

 MotionStudio engineering software

First steps

Manual – EtherCAT

®

 Interfaces, Field Distributors

99

Engineering via interface adapters

If your device supports the "SBus" or "Serial" communication options, you can use a
suitable interface adapter for engineering.

The  interface  adapter  is  additional  hardware  that  you  can  obtain  from  SEW-
EURODRIVE. You can use it to connect your engineering PC with the respective com-
munication option of the device.

The  type  of  interface  adapter  you  require  depends  on  the  communication  options  of
the respective device.

Communication channels

The  SEW  Communication  Server  is  integrated  into  the  engineering  software
MOVITOOLS

®

 MotionStudio for establishing communication with the devices.

The SEW Communication Server allows you to create communication channels. Once
the  channels  are  established,  the  devices  communicate  via  these  communication
channels using their communication options. You can operate up to 4 communication
channels at the same time.

MOVITOOLS

®

 MotionStudio supports the following types of communication channels:

•

Serial (RS485) via interface adapters

•

System bus (SBus) via interface adapters

•

Ethernet TCP/IP, PROFINET IO, EtherNet/IP™, Modbus/TCP

•

EtherCAT

®

•

Fieldbus (PROFIBUS DP-V1)

•

Non-proprietary software interface Tool Calling Interface

The available channels can vary depending on the device and its communication op-
tions.

Functions

The MOVITOOLS

®

 MotionStudio engineering software enables you to perform the fol-

lowing tasks with consistency:

•

Parameterization (e. g. in the parameter tree of the device)

•

Startup

•

Visualization and diagnostics

•

Programming

MOVITOOLS

®

 MotionStudio provides the right tools for every device type.

13.2

First steps

13.2.1

Starting the software and creating a project

Proceed as follows:

1. Select  the  following  item  from  the  Windows  start  menu:  [Start]  /  [Pro-

grams] / [SEW] / [MOVITOOLS MotionStudio] / [MOVITOOLS MotionStudio]

ð

MOVITOOLS

®

 MotionStudio is started.

2. Create a project with a name and directory.

25809148/EN – 01/2019

Summary of Contents for MFD Series













































































































































Reviews:

No comments