Sens SG-A1, User Manual

Page: 95 / 100

SENS.413347.015RE
95
K.7 Description of read/write functions parameters, their code and access restriction are
shown in table K.5
Table K.5
Designation
Access
Description of parameter
Parameter
code
P A B
CH3H R R - Concentration, % LFL 0x00
CHLELH R R - Concentration, % vol. fraction 0x01
CURRENT R R - Value of current in current loop 4...20 mA 0x02
SOSTBYTE R R - Status byte of gas detector 0x03
GIST_HART R RW + Hysteresis, % of LFL 0x06
SN_PP R R + Serial number of primary transducer 0x07
LL_HART R RW + LFL of component, % vol. fraction 0x08
RS_HART R RW + Relative sensitivity to component 0x09
RELE1_HART R RW + Settings - relay 1 0x0A
RELE2_HART R RW + Settings - relay 2 0x0B
INVR1R2_HAR
T
R RW +
Settings - inversion of relay 1 and relay 2 0x0C
PERCENT R R -
Percentage of current value in current loop
4...20 mA 0x0D
LEV1 R RW + Status of threshold 1 0x10
LEV2 R RW + Status of threshold 2 0x11
LEV3 R RW + Status of threshold 3 0x12
LEV4 R RW + Status of threshold 4 0x13
LEV5 R RW + Status of threshold 5 0x14
LEV1_VALUE R RW + Value of critical value of threshold 1 0x15
LEV2_VALUE R RW + Value of critical value of threshold 2 0x16
LEV3_VALUE R RW + Value of critical value of threshold 3 0x17
LEV4_VALUE R RW + Value of critical value of threshold 4 0x18
LEV5_VALUE R RW + Value of critical value of threshold 5 0x19
VID R R + Device Manufacturer 0x81
PID R R + Device type 0x82
SN R R + Device serial number 0x83
PREANSW RW RW - Number of preambles in response 0x84
ALARMCUR R RW + Alarm current (mA) 0x86