Selco Genesis 1700 AC/DC, Repair Manual, Page: 108 / 124

218
15.2) List of set up parameters (TIG)
306 Short circuit current (lift start)
Parameter setting: Amperes (A).
Minimum 3A, Maximum Imax, Default 30A
307 Start current (HF start)
Parameter setting: Amperes (A).
Minimum 3A, Maximum Imax, Default TIG DC 100A, Default TIG AC 30A
312 Arc detachment voltage
Allows you to set the voltage value at which the electric arc switch-off is forced.
It permits improved management of the various operating conditions that occur. In the spot welding phase, for example,
a low arc detachment voltage reduces re-striking of the arc when moving the electrode away from the piece, reducing
spatter, burning and oxidisation of the piece.
Never set an arc detachment voltage higher than the no-load voltage of the power source.
Minimum 0.0V, Maximum 99.9V, Default 45V
501 Info
Allows the display of a set of information related to the system.
502 Alarm queue
Allows the intervention of an alarm to be indicated and provides the most important indications for the solution of any
problem encountered.
(Consult the “Alarms screen” section).
656 Management WU
Off No active
Syn Sinergic mode
START WU - Torch button
- TH2O < 5°C
STOP WU (ARC OFF) - Not activate welding machine (TH2O < 30°C + t >180s)
- Not activate welding machine (TH2O > 30°C + t >600s)
- MMA welding process
- Water pressure alarm
REGOLATION WU (ARC ON)
Cool temperature Power WU
TH2O < 5°C 100%
TH2O 5÷30°C 80%
TH2O 30÷40°C 80-100%
TH2O > 40°C 100%
1÷600 Manual Mode
START WU - Torch button
STOP WU - Not activate welding machine (t=1÷600)
REGOLATION WU - 100%
On Active
START WU - Switch On welding machine
STOP WU - Switch Off welding machine
REGOLATION WU - 100%
*TH2O = Cool temperature
*t= Last weld time