73
Press the TEST Button and the message "NOW CALCULATING" will be displayed on the screen, and it will
then proceed automatically to the next screen.
The set MAX speed values will be displayed. Move the gun again and check that these are no problems
with these speed settings. If everything seems in order, press the TEST Button.
If the speed settings need to be adjusted again, press the SERVICE Button. The results of the adjustment
will not be saved and the screen will return to the Gun Speed Setting screen.
Press the TEST Button and the message "COMPLETED" will be displayed on the screen, and it will then
proceed automatically to the Gun Speed Setting screen.
Summary of Contents for HOUSE OF THE DEAD 4 SUPER DELUXE
