Sega HOUSE OF THE DEAD 4 SUPER DELUXE, Owner'S Manual

Page: 22 / 148

19
3.6.1. Connection to the power supply
•
Be sure that the machine is not connected to the mains supply before attempting
this operation
•
QUALIFIED SERVICE PERSONNEL should only carry out this operation.
1. Ensure that the main switch is OFF.
2. Insert the connector on the non-power plug end of the power cord into the AC unit's inlet. Pass the
connector through the hole in the base of the satellite and insert it firmly into the AC unit's inlet.
3. Insert the power plug firmly into a power socket.
4. If you are using a separate earth cable connect one end of the earth to the earth terminal on the AC
unit and the other end to your in-store earth terminal. The AC Unit earth terminal has a Bolt and Nut
combination. Take off the Nut, pass the earth wire through the Bolt, and fasten the nut. <For
Taiwan>
*Note that the earth wire is incorporated in the power cord for the Areas of AC 120V (USA) and AC 220
～
240V, and therefore, this procedure is not necessary.
5. Firmly insert the power plug into the socket outlet. Insert the opposite side of the power cord plug to
the AC Unit's connector ("INLET"). Perform wiring for the power cord and earth wire. Install
protective insulation for the power cord and earth wire. If you are using a separate earth to earth the
product make sure you install protective insulation for this also.