80
9.1. Replacing the microswitch
The Control Unit (Gun) houses two microswitches, the trigger microswitch and the grenadebutton
microswitch.
Turn off power to the cabinet.
Removing all 9 screws will allow cover L and
cover R to be taken apart. Remove all 9
screws.
SCREW (9), black
M3
×
12, w/small flat & spring washers
Place cover R face down on the work surface
and slowly lift cover L directly upward.
Lift the trigger microswitch up from where it is
attached to cover R.
Summary of Contents for HOUSE OF THE DEAD 4 SUPER DELUXE
