36
3.10.2.Standard lamp replacement
•
TURN OF THE MACHINE.
•
Remove the four (4) truss head screws that
secure the ASSY CONTROL PANEL to the
Gun Cabinet.
•
Lift off the ASSY CONTROL PANEL and
disconnect the Lamp and switch holders
before removing.
•
Disconnect the lamp at the top connection point.
•
Carefully raise the lamp assembly unit the unit is free from the cabinet.
•
Replace the lamp following the instructions for the BILLBOARD LAMP replacement.
Follow the procedure in reverse to reassemble.
Summary of Contents for HOUSE OF THE DEAD 4 SUPER DELUXE
