Sega HOUSE OF THE DEAD 4 SUPER DELUXE, Owner'S Manual

Page: 109 / 148

106
10.20. Changing the lamp unit.
To prevent electric shock and fire hazards, only perform this operation after turning
off the main power switch and removing the power cord from the socket.
Never put anything metal or flammable into the interior of the DLP.
Using it with such an object inside may lead to an electric shock or fire.
Make sure that the lamp is firmly in place. If the lamp is loose then it is a fire hazard,
and it also might not come on.
The lamp becomes very hot during use and remains so for a while afterward.
Attempting to change the lamp before it has sufficiently cooled may lead to burns and
other injuries.
If the lamp shatters fragments of glass will remain inside the lamp.
Never shake a shattered lamp or hold/place one higher than eye level.
Doing so could lead to a serious accident.
When opening the door or lamp cover to change the lamp, do not touch or remove any
parts that are unrelated to the lamp changing process. Doing so may lead to injury, and
could also harm the efficient working of the product.
Do not remove any screws other than those specified below. Doing socould harm the
efficient working of the product.
Always perform the lamp changing operation with the power turned off.
Once you have inserted the new lamp only turn the power back on once the lamp exchange cover is back
in place. Then enter SPECIAL mode and reset the lamp timer on the Lamp Timer Screen.