88
10.3. Colour adjustment
The projector is precisely adjusted in the factory prior to sale. Avoid unnecessary
adjustment at all costs. Needlessly altering adjustment data may make any later
repairs harder to perform.
Before performing any adjustments you must first press the ADJUST button and enter ADJUST Mode. If
you wish to exit without making any adjustments press the ADJUST button twice to return to Normal
Mode.
Once in ADJUST Mode press the button for the adjustment you wish to make.
When the adjustment category is displayed used the ADJUST [
▲
] [
▼
] [ ] [ ] buttons to make adjustments.
When you have finished making adjustments press the WRITING button to record the adjusted data. If
you wish to exit without saving the adjusted data return to Normal Mode without pressing the WRITING
button and then turn the power off for a reasonable period of time. Press the ADJUST button three times
to return to Normal Mode.
Summary of Contents for HOUSE OF THE DEAD 4 SUPER DELUXE
