Sega HOUSE OF THE DEAD 4 SUPER DELUXE, Owner'S Manual

Page: 9 / 148

6
3.1.1. Precautions when moving the machine
When moving the machine, be sure to pull out the plug from the power supply.
Moving the machine with the plug still inserted can cause the power cord to be
damaged, resulting in a fire and/or electric shock.
When moving the machine on the floor, retract the adjusters, and ensure that the
casters make contact with the floor. Pay careful attention so that the casters do
not run over power cords and earth wires. Damaging the power cords can cause
an electric shock and/or short circuit.
When moving across an area with a sharp difference in height, first separate the
cabinet and ASSY DIP. Tilting them whilst the two are still joined together may
damage the connectors and could cause injury.
When lifting the cabinet, be sure to hold the handles and the bottom part. Lifting
the cabinet by holding other portions may damage parts and installation portions
due to the empty weight of the cabinet, and may cause personal injury.
When moving the ASSY DLP, do not push it from the rear side. Push it from
sideways. Pushing the ASSY DLP from the rear side can have the ASSY DLP fall
down, causing personal injury, etc. In case the floor has slanted surfaces or step-
like differences, be sure to move the machine by 2 or more persons.
When the cabinet and ASSY DIP are not connected the cabinet is unstable on its
own. Pushing it may cause it to fall over. When detached always keep the
cabinet on a level surface and make sure it does not start to lean to the left or
right whilst working on it.
Do not hold or press the plastic parts as indicated by the Figure. Failure to
observe this instruction may break the parts, and eventually the broken pieces
may cause a personal injury.
When moving the cabinet do not hold or push the gun holders. This could deform
their shape or cause damage to them.
Never push on the projector's screen. The screen is easily damaged but cannot
be repaired. If damaged the entire screen must be replaced.
Pushing the ASSY DLP from the
back may make it fall over. Always
push it from the side.