Sega HOUSE OF THE DEAD 4 SUPER DELUXE, Owner'S Manual

Page: 27 / 148

24
The software will install automatically from the DVD. The message "Check Release Image
・・・
XX.XX%" will be displayed on the screen.
Once the install finishes, the game screen will be displayed. The install takes about five minutes. Once it
is finished remove the DVD. Press the switch on the DVD drive and the tray will open. Take the DVD
out.
Press the switch on the DVD drive and close the tray again. The tray will not move once the power is off
so be sure to do this before turning off the power.
Turn the main switch on the AC unit OFF.
Remove side door L.
Undo the two cord clamps holding the DVD wire in place and disconnect the DVD wire connectors
attached to the LINDBERGH board. Leave the keychip inserted.
Stick the sticker "844-0002D-02" onto the LINDBERGH board. The LINDBERGH board initially has a
sticker "844-0001D-02" on it. Place the new sticker over this old one.
Place the plate DVD back into side door L and fix it in place with the two truss screws.
Replace side door L on the cabinet and lock it.
Fix side door L in place with the three truss screws.
Replace the DVD drive's case lid and fix it in place with the plastic-head screw.
Store the DVD drive, DVD wire and DVD software kit in a place free from dust and cigarette smoke.