122
14. Error
codes.
If an error code is displayed get on-site maintenance personnel or other qualified
professional to look at it. An unqualified person attempting to resolve an error code
problem may lead to electric shock, short circuit and risk of fire.
If no on-site maintenance personnel or qualified professional is available immediately
turn off the power and contact the customer services in this manual or your supplier.
If a problem not described in this manual occurs, or the resolution to a problem
described in this manual is not effective, do not make further attempts to resolve the
problem yourself.
Immediately turn off the power and contact the customer services in this manual or
your supplier. Any unguided attempts to solve such problems may lead to a serious
accident.
If Error 20 occurs it is necessary to restart the machine in order to clear the error.
The errors below include some which can never occur during the normal operation of
"The House of the Dead 4."
If an error number or message not listed below appears, cease using the product
immediately and send the LINDBERGH board in for repairs.
The LINDBERGH board is equipped to display various errors on-screen to help solve any problems. If an
error is displayed the game cannot be used. Use the following table of causes and resolutions to solve the
problem.
Error 01
DISPLAY
Game Program Not Found.
CAUSE
The key chip is not connected.
COUNTERMEASURES
Check that the key chip is connected correctly. Check that the keychip is not
inserted the wrong way or that the key chip from a different system is not
inserted.
Error 02
DISPLAY
Game Program Not Available.
CAUSE
The key chip is not supported.
COUNTERMEASURES Send the LINDBERGH board in for repair with the key chip still in place.
Error 05
DISPLAY
Wrong Region.
CAUSE
The game is for a foreign region.
COUNTERMEASURES Use a domestic game.
Summary of Contents for HOUSE OF THE DEAD 4 SUPER DELUXE
